Deye 122.8 kWh Commercial Energy Storage System with 30–50 kW Inverter
122.8 kWh commercial battery cabinet with 30 to 50 kW output and built-in EMS
The GE-F120 is a commercial battery cabinet, one floor-standing unit holding 122.8 kWh of LiFePO4 storage with the energy manager, the hybrid inverter and the battery management already built in. It is meant for a factory, a farm or a hotel that wants to move its own load off the peak tariff, or to keep running when the grid drops. One cabinet gives 30 to 50 kW depending on the build, and ten can be paralleled off grid.
One cabinet, 122.8 kWh, built from 5.12 kWh LiFePO4 modules working across a 500 V to 700 V bus. The hybrid inverter and the energy manager sit inside it, so there is no separate inverter to buy or wire. Round trip you get back up to 89% of what you put in, with the charge and discharge stage alone rated at 97.6%. It weighs 2,090 kg and stands 2,235 mm tall, so it needs a prepared slab and a forklift.
At a glance
| Energy per cabinet | 122.8 kWh |
| Output power | 30 to 50 kW by build |
| Round-trip efficiency | up to 89% |
| Cabinet weight | 2,090 kg |
Full specifications
| Energy Capacity (kWh) | 122.8 |
| Cycle Life | 6000 |
| Rated Output Current (A) | 43.5 |
| Operating Voltage Range (V) | 500-700 |
| Charge Efficiency (%) | 97.6 |
| Battery Type | LiFePO4 |
| Certifications | UN38.3, IEC62619, IEC61000, |
| Module Energy (kWh) | 5.12 |
| Phase Grid Type | 3L/N/PE |
| Rated Power (W) | 50000 |
| Parallel Units | 10 |
| Round Trip Efficiency (%) | 89 |
| Eol Capacity (%) | 70 |
| Scalability (kWh) | 3600 |
| Communication Interface | ETH/4G |
| Warranty (years) | 10 |
| BMS Communication | CAN |
| Installation | Floor-Mounted |
| IP Rating | IP65 |
| Storage Temperature Range (°C) | 0~35 |
| Relative Humidity (%) | 15%~85% (No condensing) |
| Operating Temperature (°C) | Charge: 0~55/Discharge: -20~55 |
| Weight (kg) | 2090 |
| Dimensions (mm) | 1780 x 2235 x 1056 |
Model code: GE-F120-2H6-4H6